♻SOECOPO Complete Solar System Kit – Fuel Your Off-Grid Life with Steady, Eco-Friendly Energy

🔶Benefits of Using a SOECOPO® Solar Power Kit for Home

Transitioning to a solar-powered home offers significant environmental and financial benefits:

✅ Reduce Carbon Footprint: By harnessing the sun’s energy, you cut reliance on fossil fuels, lowering your carbon footprint and fighting climate change.

✅ Energy Cost Savings: Solar power reduces long-term electricity expenses, especially in remote or off-grid areas with high utility costs.

✅ Power Independence: During grid outages, solar systems keep your home powered—ideal for emergencies or extreme weather.

✅ Longevity & Reliability: Solar systems require minimal maintenance and can last decades, providing steady energy for years.

✅ Boost Home Resale Value: Solar installations increase a property’s marketability and potential resale value.

 

Package list

✅Solar Panel ×1
✅SOECOPO Charge Controller ×1
✅Inverter ×1
✅Accessories:
（1）Controller Alligator Clips ×1
（2）Inverter Alligator Clips ×1
（3）DC Cables (Red/Black) ×2
（4）Carabiners ×2
（5）Suction Cups ×4
（6）Car Inverter Cable ×1
（7）User Manual ×1

⚠️ Batteries not included (user-provided).

Product Parameters

✅Solar Panel
Power Range: 50W - 800W
Output: DC 18V + USB 5V
Dimensions: 540mm × 280mm (21.2in×11in)
Weight: 700g / 24.6oz
Material: Aluminum substrate + Efficient chip + PET
Interface: DC interface + Single USB

 

✅SOECOPO Charge Controller

1.Voltage: Auto 12V/24V Detection
2.Charging Current: 10A, 20A, 30A, 40A, 60A, 100A
3.Display: Real-time Voltage/Current Monitoring
4.Operating Temp: -35°C to +60°C

✅Inverter

Peak Power: 10000W
Rated power：1000W
Input: DC 12V
Output: AC 220V
Safety Protection: Overload, Short Circuit, Input Under Voltage, Over Voltage, Overtemp, Low Voltage Protection
 

⚠ Important Power Information

The 10000W peak power refers to short-term startup power support.
The continuous working power is 1000W.

！！Please check your device's rated power and startup power before use to ensure compatibility！！

⚙ Connection method

● Connect the battery: Connect the DC cables between the charge controller and the battery (pay attention to correct polarity of positive and negative poles), this step prepares the battery for energy storage.
● Connect the solar panel: Link the solar panel to the charge controller via the DC cable, initiating solar power conversion and charging.
● Connect the inverter: Attach the power inverter to the battery using the battery clamps/cables, then you can directly plug in and use AC appliances.
Note: Be careful to distinguish between positive and negative poles.
 

👇Purchase precautions

⚠ Before Purchase Please select the correct voltage version according to your battery system！

12V inverter only works with 12V batteries.
24V/48V versions require matching battery voltage.

Incorrect voltage connection may cause product damage.

🔒 Safety & Stability

Delivers 1000W continuous power for daily devices; handles 10000W surge power for motors or tools without overload risks.

⚠ Load Reminder
The actual working power depends on the connected device.
Some appliances require higher startup power than their rated power.
Please make sure the startup power is within inverter capacity.

🛡️ 6-in-1 Intelligent Protection

Auto-shutdown for reverse connection,
overheating, over/under voltage, overload, and short circuits. Keeps you and your devices safe.

⚠ Protection Working Notice
If protection mode is activated, the inverter may stop working temporarily.
Please remove excessive load, check connections and restart the inverter after cooling down.

⚠️ Note:

❗Avoid multi-device use!
❗Car fridge must have ≤1000W startup power.
❗This inverter is suitable for devices within the rated power range.
❗For high-power appliances such as microwave ovens, air conditioners and heating devices, please confirm their startup power before use.
❗Not recommended for medical equipment or life-support equipment.

⚠️Additional User Tips

🌞 Use a battery with sufficient capacity for stable operation.

🌞 Avoid using multiple high-power devices at the same time.

🌞 Stop using immediately if abnormal smell, smoke or unusual noise appears.

🌞 Keep cables tightly connected to avoid poor contact.

Mode 1: Solar Panel → Mobile Device

✅Features
▸Direct charging via USB (5V output), no controller/battery required.
▸Plug-and-play for emergency use.
✅Precautions
▸Use the built-in USB port on the solar panel.
▸Avoid overcharging under strong sunlight (recommend a phone charge protector).
✅Scenarios
▸ Outdoor emergency charging (camping/hiking)
▸ Phone/tablet power supply in off-grid areas

 

Mode 2: Solar Panel → Controller → Light Bulb

✅Features
▸Controller stabilizes voltage for bulb protection.
▸Supports low-wattage LED bulbs (≤15W).
✅Precautions
▸Connect controller to a Solar Panel first (even for temporary lighting).
▸Match bulb power to controller’s discharge current (≤10A).
✅Scenarios
▸ Nighttime outdoor lighting (tents/backyards)
▸ Emergency lighting during power outages

 

Mode 3: Solar Panel → Controller → Battery

✅Features
▸Efficient energy storage with overcharge/discharge protection.
▸Compatible with lead-acid, lithium, and gel batteries.
✅Precautions
▸Connect battery poles correctly to controller terminals (+/-).
▸Set battery type on controller after initial connection (e.g., b1/b2/b3 modes).
✅Scenarios
▸ Daytime solar storage for nighttime use
▸ Off-grid battery bank setup

 

Mode 4: Battery → Inverter → Appliances

✅Features
▸Inverts 12V DC to 110V/220V AC for high-power devices.
▸6000W peak power supports motor-driven tools (e.g., drills, refrigerators).
✅Precautions
▸Inverter input voltage must match battery (12V).
▸Keep continuous load ≤650W; peak load ≤30 seconds per use.
✅Scenarios
▸ Car appliances (fridges/laptops)
▸ Emergency home devices (fans/medical equipment)

 

Mode 5: Solar Panel → Controller → Battery → Inverter → Appliances

✅Features
▸Full off-grid power chain: Solar → Battery → Household devices.
▸Dual protection (controller + inverter) with real-time monitoring.
✅Precautions
▸Connection sequence: Solar → Controller → Battery → Inverter.
▸Match total power: Solar peak 800W + Inverter continuous 650W.
✅Scenarios
▸ Home off-grid systems (lights/TV/small appliances)
▸ RV/boat all-day power solutions

 

🟩Before Using Your Solar System - Important Q&A

Q1:Does the 10000W inverter provide continuous 10000W output?
💡A:No.10000W is the peak surge power for short startup needs.
The actual continuous output power depends on the inverter rated power.
Please check the rated power before connecting devices.

Q2:Why does my appliance not start?
💡A:Some appliances require higher startup power than normal working power.
Please check the startup power requirement before connection

Q3:Can the solar panel work continuously?
💡A:Solar panels only generate power when sunlight is available.
Charging performance depends on sunlight intensity, weather and installation angle.

Q4:Is the battery included?
💡A:No.This kit includes the solar panels, controller, inverter and accessories shown in the product description.

Q5:What battery is suitable?
💡A:Please use a battery that matches the inverter voltage.
Choose suitable battery capacity according to your usage needs.

Q6:Why does the inverter stop working?
💡A:Possible reasons:Overload
Low battery voltage
Overheating
Short circuit
Reduce load and check the system connections.

Q7:Why does the system generate heat?
💡A:Heat during power conversion is normal.
Keep enough ventilation space and avoid covering the equipment.

"

🔋Choose the right battery

Choosing the right battery is very important for your inverter to work safely and stably.

1. Selection Principle

The actual output power of the inverter is determined by the discharge capability of the battery.

If the battery capacity is too small, the following problems will occur:
⭐Low voltage alarm
⭐Automatic shutdown
⭐Unable to drive loads
⭐Cannot reach rated power

2. How to calculate the required battery current

The maximum current the battery needs to supply depends on your inverter power and battery voltage.

Formula:

Discharge Current (A) = Inverter Rated Power (W) ÷ Battery Voltage (V) ÷ 0.85

3. Suggested Battery for Common Inverters

For 12V Batteries
⭐500W inverter → Recommended battery: 70Ah or above
⭐1000W inverter → Recommended battery: 100Ah or above
⭐1500W inverter → Recommended battery: 150Ah or above
⭐2000W inverter → Recommended battery: 200Ah or above

For 24V Batteries
⭐1000W inverter → Recommended battery: 70Ah or above
⭐1500W inverter → Recommended battery: 100Ah or above
⭐2000W inverter → Recommended battery: 150Ah or above
⭐3000W inverter → Recommended battery: 200Ah or above


4. Important Tips

⭐Insufficient battery capacity will cause low voltage alarm, shutdown or unable to reach full power.

⭐For long life and safe use, do not overload the battery.

⭐If you need help choosing a battery, please tell us your inverter model and load power.

 

solar panel kit plug and play plug 220v
solar kit plug and play 220 volts
kit solar 6000w
12000w solar panel for home
solar panel 10000w
10000w solar plates kit for home complete kit
solar system 6kw complete
all on one solar system
portable solar generator 3000w
balcony power plant storage 2 kwh
800w solar kit
integrated solar energy with battery
energy storage with solar panels
solar panel for home complete kit 10000w
10000w solar panels complete kit
solar panels 10000w house
5000w complete solar plate kit
10000w complete solar kit with battery
solar system complete kit 12000w
solar generator set
solar plates for home complete kit 20000w
complete solar kit for home 10000w
Photovoltaic panels
800w full balcony photovoltaic